version: "1.0.1" name: adctoolbox-user-guide description: > Router skill for using ADCToolbox from Python. Trigger when a task involves: computing or plotting spectra (SNDR, SFDR, ENOB, THD) from ADC output, fitting a sine to measured aout, calibrating SAR weights (weight_sine / weight_sine_lite), generating synthetic ADC stimulus/output, or validating aout/dout buffer shapes. For deeper debug (dashboards, phase-plane, bit-level, error decomposition, static nonlinearity, ramp INL/DNL, cap-to-weight), open references/advanced-debug.md. NOT for analog topology selection, transistor sizing, Spectre simulation, or layout/parasitic review — those belong to the analog-agents skills (analog-design, analog-verify, analog-audit). NOT for editing ADCToolbox source code — use adctoolbox-contributor-guide instead.

ADCToolbox Usage Guide

Router, not a full manual. Keep the basic tier resident; open references/*.md only when you need more.

1. When to use (and not to use)

Use for:

• Writing, fixing, or reviewing Python that calls ADCToolbox APIs
• Picking the right spectrum / calibration helper
• Getting from a raw dout / aout buffer to SNDR / SFDR / ENOB
• Generating synthetic ADC stimulus for a testbench
• Forward-modeling an ADC architecture in Python — for SAR, use

adctoolbox.models.sar_convert / sar_reconstruct / sar_ideal_weights / sar_apply_cap_mismatch (binary or sub-radix-2, with optional unit-cap mismatch + sampling noise + comparator noise; vectorized). Convention: vin is interpreted relative to quant_range=(v_min, v_max), default (0, 1). SAR weights are still explicit and normalized by sum(bit_weights) + 1 LSB (for example [8, 4, 2, 1] / 16, or redundant [8, 4, 4, 2, 1] / 20). For differential SAR, pass VIP - VIN with a differential quant_range such as (-VDD, VDD). Keep analog CDAC weights and digital reconstruction weights explicit; they match unless modeling mismatch or calibration.

Do NOT use for:

• Analog topology / transistor design → analog-design, analog-explore
• Spectre simulation, pre/post-layout audit → analog-verify, analog-audit
• Editing ADCToolbox's own source → adctoolbox-contributor-guide

2. Critical conventions (read first — these are the common bug sources)

Names

• `bits` is the per-sample binary decision matrix shape (N_samples, N_bits),

values in {0, 1} — used by every digital-calibration / bit-level helper.

• `aout` is the analog output (1D float array) — used by spectrum and

error-analysis helpers.

• ADC integer codes are not bits; convert separately if your data is

packed as integers.

Frequency units

• fs, Fin, plotting frequencies: Hz.
• fit_sine_4param(...)["frequency"]: normalized Fin/Fs (range 0–0.5),

not Hz.

• calibrate_weight_sine, calibrate_weight_sine_lite, analyze_enob_sweep,

generate_dout_dashboard: freq parameter is normalized Fin/Fs.

• generate_aout_dashboard: freq is in Hz (it normalizes internally).
• analyze_spectrum does NOT take Fin — it auto-detects the fundamental

from the FFT.

Return shapes

Most analysis functions return dict. Notable exceptions and dict-key gotchas:

analyze_weight_radix(weights)["effres"] is computed from significant absolute weights as log2(sum(abs_w_sig) / min(abs_w_sig) + 1). It estimates the theoretical span of the supplied SAR/DAC weight list; it is not a missing-code, DNL/INL, or SAR-reachability check.

When docs conflict, trust the current __init__.py exports + the tests/integration/test_user_guide_skill_examples.py smoke tests.

3. Basic workflow — spectrum

from adctoolbox import (
    analyze_spectrum, analyze_spectrum_polar,
    find_coherent_frequency, fit_sine_4param,
)
from adctoolbox.fundamentals import validate_aout_data
validate_aout_data(aout)
metrics = analyze_spectrum(aout, fs=fs, create_plot=False)
print(metrics["sndr_dbc"], metrics["sfdr_dbc"], metrics["enob"])

For subplot layouts, pass the target Matplotlib axes directly. Do this before falling back to custom FFT plotting:

fig, axes = plt.subplots(3, 1)
for ax, trace in zip(axes, traces):
    metrics = analyze_spectrum(trace, fs=fs, create_plot=True, ax=ax)

When side_bin=None, spectrum tools use the selected window's coherent main-lobe width. If the capture is intentionally non-coherent, pass a larger side_bin explicitly; the analyzer does not infer that from the waveform.

To set up a coherent capture upstream (where you control the stimulus frequency), snap Fin to an FFT bin first:

fin_hz, k_bin = find_coherent_frequency(fs, fin_target_hz, n_fft=len(aout))
# now drive the test with fin_hz

Pick the variant by output:

• analyze_spectrum — magnitude spectrum + SNDR/SFDR/ENOB/THD metrics dict

(default — annotated white-bg plot, Hann window)

• analyze_spectrum_virtuoso — same metrics, but Cadence Virtuoso /

ADE-Explorer dark-theme stem plot. Defaults to rectangular window (one stem = one bin, no main-lobe smearing).

• analyze_spectrum_polar — phase-aware (I/Q or mixer contexts); same keys
• quick_sndr — lean SNDR + ENOB only. Use in optimization loops,

parameter sweeps, spec gates. No plot, no SFDR/THD/HD/NSD breakdown. Returns just {sndr_dbc, enob}.

• compute_spectrum (from adctoolbox.spectrum) — both metrics and plot-ready

data (access via result["plot_data"]["freq"] etc.)

• find_coherent_frequency — pre-step at signal generation time, not analysis
• fit_sine_4param — pre-step for nonlinearity work; remember its

"frequency" key is normalized Fin/Fs

For the lean path:

from adctoolbox import quick_sndr
m = quick_sndr(aout, fs=fs)
print(m["sndr_dbc"], m["enob"])
# Override the window when the upstream stimulus is coherent and
# you want a clean rectangular FFT instead of Hann:
m = quick_sndr(aout, fs=fs, win_type='rectangular')

4. Basic workflow — digital calibration

from adctoolbox import calibrate_weight_sine
from adctoolbox.calibration import calibrate_weight_sine_lite
from adctoolbox.fundamentals import validate_dout_data
validate_dout_data(bits)            # bits: (N_samples, N_bits) in {0, 1}
freq_norm = fin_hz / fs             # normalized — not Hz
result = calibrate_weight_sine(bits, freq=freq_norm)
weights = result["weight"]
calibrated = result["calibrated_signal"]
weights_fast = calibrate_weight_sine_lite(bits, freq_norm)   # ndarray, no dict

calibrate_weight_sine returns a dict with weight, offset, calibrated_signal, ideal, error, refined_frequency. The _lite variant returns just the weights ndarray and is positional (no freq= kw). If freq is omitted, calibrate_weight_sine estimates the tone frequency and then fine-searches it against the calibration residual. If the coherent training frequency is already known, pass freq=k/N to keep that exact frequency fixed; use force_search=True only when you deliberately want to refine a provided frequency.

5. Import rules (compressed)

If a flat import fails, check the submodule's __init__.py before concluding the tool is gone. Common submodule-only names: ADC_Signal_Generator (siggen), compute_spectrum (spectrum), calibrate_weight_sine_lite (calibration), validate_aout_data / validate_dout_data / convert_cap_to_weight (fundamentals), analyze_phase_plane / analyze_error_phase_plane (aout), generate_aout_dashboard / generate_dout_dashboard (toolset).

6. Going further

• Dashboards, phase-plane, bit-level, error decomposition, static

nonlinearity, ramp INL/DNL, cap-to-weight → `references/advanced-debug.md`

• Function signatures / return keys → references/api-quickref.md
• Ready-to-adapt example files → references/example-map.md

Highly Recommended Baseline: For the simplest end-to-end analysis

• plot template, adapt 02_spectrum/exp_s03_analyze_spectrum_savefig.py

(see references/example-map.md for the path). The packaged CLI adctoolbox-get-examples [dest] dumps the full example tree.

Every code block in this file (and in references/advanced-debug.md) is exercised by python/tests/integration/test_user_guide_skill_examples.py — if a future edit breaks one, that test fails.