name: configure-canvas-mcp version: 2.1.0 description: Configure the Canvas Authoring MCP server for the current coauthoring session. USE WHEN "configure MCP", "set up MCP server", "MCP not working", "connect Canvas Apps MCP", "canvas-authoring not available", "MCP not configured", "set up canvas apps". DO NOT USE WHEN prerequisites are missing — direct the user to install .NET 10 SDK first. author: Microsoft Corporation user-invocable: true allowed-tools: Bash, AskUserQuestion, mcp__canvas-authoring__connect

Configure the Canvas Authoring MCP Server

This skill configures the Canvas Authoring MCP server for the user's current Power Apps coauthoring session. The MCP server is auto-registered by the plugin — this skill connects it to a specific app session.

Instructions

0. Check prerequisites

Verify that .NET 10 SDK or higher is installed:

dotnet --list-sdks

If a version 10.x.y or higher is not listed, tell the user:

⚠️ .NET 10 SDK is required to run the Canvas Authoring MCP server. It looks like you don't have it installed. Please install it first to use this skill. https://dotnet.microsoft.com/download/dotnet/10.0

Then wait for the user to install it before continuing. If they say it's installed, run the command again to confirm. If it's still not found, repeat the message until they have it installed.

1. Ask for the studio URL

Ask the user:

What is the URL of your canvas app studio session?

Copy the URL from the browser address bar while your app is open in Power Apps Designer (it should look like https://make.powerapps.com/e/Default-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/canvas/?action=edit&app-id=...).

Make sure coauthoring is enabled in the app (Settings → Updates → Coauthoring).

Keep this browser tab open for the entire session. The MCP server communicates with Power Apps through the coauthoring session tied to that tab. Closing the tab ends the coauthoring session, which prevents compile_canvas and sync_canvas from working and means you can't see or save generated changes.

2. Extract parameters from the URL

Parse the following from the studio URL:

• ENV_ID: the path segment between /e/ and the next / (e.g. Default-91bee3d9-0c15-4f17-8624-c92bb8b36ead).
• APP_ID: URL-decode the app-id query parameter value, then take the last segment after the final / (e.g. 6fc3e3d1-292b-4281-8826-577f78512e56)
• MAKER_HOSTNAME: the hostname of the URL (e.g. make.powerapps.com)
• CLUSTER_CATEGORY: determined from MAKER_HOSTNAME (see table below)

Determine CLUSTER_CATEGORY from MAKER_HOSTNAME:

Example:

Example URL: https://make.powerapps.com/e/Default-91bee3d9-0c15-4f17-8624-c92bb8b36ead/canvas/?action=edit&app-id=%2Fproviders%2FMicrosoft.PowerApps%2Fapps%2F6fc3e3d1-292b-4281-8826-577f78512e56

• ENV_ID → Default-91bee3d9-0c15-4f17-8624-c92bb8b36ead
• APP_ID → 6fc3e3d1-292b-4281-8826-577f78512e56
• MAKER_HOSTNAME → make.powerapps.com
• CLUSTER_CATEGORY → prod

3. Configure the MCP server

Call the connect MCP tool to connect the server to the user's coauthoring session:

mcp__canvas-authoring__connect(
  environment_id: ENV_ID,
  app_id: APP_ID,
  cluster_category: CLUSTER_CATEGORY,
  // Optional — include only if the user has expressed a preference or a prior sign-in failed (see below):
  auth_flow: "broker" | "browser" | "devicecode",
  login_hint: "user@contoso.com",
  tenant_id: "00000000-0000-0000-0000-000000000000",
  force_account_select: true
)

Optional parameters — do NOT prompt the user for these. Only include them if the user has already expressed a preference earlier in the conversation, or if a prior connect attempt failed:

• login_hint: Pass the user's UPN or email only if they have indicated they want to connect as a specific/different user (e.g. "log in as alice@contoso.com"). These values cannot be derived from the maker portal URL — never guess. Omit otherwise to use the first signed-in user. When reconnecting to switch environment/app, reuse the same login_hint value as the previous successful connect (if known) so the same user is reused without re-prompting.
• auth_flow: Pass "browser", "broker", or "devicecode" only if the user has explicitly stated a preferred auth flow (e.g. "use browser sign-in"). Use "devicecode" on headless/SSH hosts where neither broker nor browser flow can pop a UI — the verification URL and user code are surfaced via an MCP elicitation request and require a client that supports elicitation. Omit otherwise to use the default.
• tenant_id: Pass a tenant GUID only for Entra B2B guest access — set it to the host/resource tenant where the user is a guest so the token is issued by that tenant rather than the user's home tenant. Combine with login_hint (the guest's home UPN) to pre-fill the account. Omit for normal same-tenant sign-in.
• force_account_select: Pass true only to force the account picker instead of silently reusing a cached account — set this when a previous connect failed with a 401/403 and no login_hint was given, so the user can pick the correct account. Omit otherwise.

If the call fails, report the error to the user and suggest checking that:

1. The studio URL is correct and the browser tab is still open
2. Coauthoring is enabled in the app settings
3. .NET 10 SDK is correctly installed
4. If sign-in failed, the user may need to specify auth_flow (broker, browser, or devicecode) or a login_hint (UPN/email) to authenticate as the correct account. On a headless/SSH host, use auth_flow: "devicecode". If a cached account keeps getting picked, retry with force_account_select: true. For Entra B2B guest access, set tenant_id to the host tenant.

4. Confirm

Tell the user:

✅ Canvas Authoring MCP server configured for your coauthoring session.

You can now use Canvas App skills like /canvas-app to create or edit your app.

To verify the setup, try: "List available Canvas App controls" — this should invoke list_controls.